
Power Wool(tm) pads from NicSand were made to fit 5" disc sanders and 8-hole vacuum sanders, but we like them as steel wool pads that happen to be self-adhesive. There are (3) 5" pads in each pack. Each pad has (8) holes in it. The cleaning and stripping pads for metal and painted/varnished/urethaned surfaces are an extra-fine "0" grade. For smoothing and deglossing between coats, they are an ultra-fine "00" grade. For finishing and polishing the coated finishes, a micro-fine "0000" grade. Nice quality. Made in the U.S.A.
![]() |
32823 EXTRA-FINE "0" PADS | |
![]() |
32822 ULTRA-FINE "00" PADS |
An anti-static bag for small, dull electronic components who aren't interested in getting a charge out of life. The zip-sealed silver-gray plastic bag is 4" x 5-5/8" overall, with a bottom gusset and a 3-1/4" x about 3-3/4" usable area. It looks opaque but is translucent when held to the light.
![]() |
32942 ANTI-STATIC BAG |
We've had our eye on this macho needle kit. It includes (7) steel needles: (1) 1-3/4" for leather, (1) 1-3/4" for carpet, (1) 2-1/4" for sails, (2) 3" needles, one for packing and one for canvas, and (2) 2-1/8" dia curved needles, one for mattresses and one for lampshades. All right. So maybe you can use the lampshade needle to sew up softballs. May we suggest you stick these on one of our magnets, so you always know where they are?
![]() |
91861 REPAIR NEEDLES |
AKA automatic stripper. Sorry folks, but this one strips insulation to reveal wire, not flesh. Which may still give you a charge, depending upon your hookup!! 6-1/2" Long with pliers type grip and automatic self-adjustment to strip wires from 0.2 to 6mm without damaging the wire says the manufacturer. We recommend use on 18 GA stranded, 22 GA solid wire or heavier as it will cut the wire of lighter weights. A second jaw is a cable cutter. Brand new, made in China. And very handy too, if you are doing anything with wiring.
![]() |
23273 WIRE STRIPPER |
Beautiful refrigerator magnets, all set to be imbedded in your child's best ever creation for refrigerator work. Six file card holding power, 3/4" dia x 3/16" thick ceramic with beveled edges to minimize chipping. They don't come much better than that!!
![]() |
89444 CERAMIC MAGNET, 3/4" |
Your choice: A 16" long metal paint mixer with a 3/8" shaft that fits right into a power drill. The bottom has a metal whirligig on it that does a fast, neat job mixing a gallon of paint. Or the smaller 10” mixer with a 3/16” shaft and a plastic whirligig, for pints of paint (or pints of Ramos gin fizz for your next Mardi Gras party). Simple, but effective. We have them because Pat bought one of the larger ones at (gasp!) another store, and liked it so much we had to find a supplier. And because we know that the new paint for your living room has been sitting in the closet, settling, for six months. Kismet.
![]() |
92227 PAINT MIXER | |
![]() |
35789 SMALL PAINT MIXER |
This torpedo level not only indicates dead-on level with its vertical and horizontal bubbles, it has a floating 360° pointer to indicate the angle of any deviation. The 8" x 2-1/8" x 5/8" plastic level has a 5-3/4" long magnet embedded in its bottom edge, a hole from which to hang it for storage, and -- maybe -- some oily residue. The residue, if there, won't hurt it, and is the reason we can offer it at this incredible price. Just wipe it off, and smile.
![]() |
92292 TORPEDO LEVEL |
That's what we say about this drill pump! Screw hoses to the threaded inlet and outlet valves (1" dia. standard garden hose size) and attach the 1/4" dia. shaft to your drill. Turn the shaft and it pumps for you. Great for aquariums, flood plains, waterbeds, maybe even a mechanical straw! Pump is 2-7/8" dia., 4-1/2" long with the in/out valves.
![]() |
91080 DRILL PUMP |
You could clamp water skis on a walrus with this baby. Our very very very strong 6" long x 1" wide steel spring clamp has red rubber insulated jaws and handles, and opens to a max of 2-1/4".
![]() |
93087 H-D SPRING CLAMP |
$2.25
EACH
Out of Stock. Check Back Soon! |
This capless steel 8-oz plumb bob measures 3-1/2" long x 7/8" hex. Run a cord through the 1.5mm bore in the center of the top, and tie it off at the 3/16" bore through the neck. (Cord not included.)
![]() |
37357 PLUMB BOB |
So go fit this 1/16" wide twist-tie wire, the same type keeping your bread fresh, around anything you need to tie up. Or down. This wire's coated with green plastic. You'll get a 125-foot spool for a penny a foot.
![]() |
37477 TWIST WIRE |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »