
Diamond point bits that, if used by your dentist would send you through the roof. The assortment of bits includes cylinders, cones (points), balls and a couple of special shapes all in a variety of sizes. In the set of (20), each has 3/32" dia. shank and is about 2-3/4" long OA. In the set of (10), each has a 1/8" dia. shank and is about 1-3/4" long OA, with larger size bit heads. Both come in plastic cases. A craftsperson's delight!!
![]() |
91246 DIAMOND POINTS, SET (10) | |
![]() |
89137 DIAMOND POINTS, SET(20) |
Power Wool(tm) pads from NicSand were made to fit 5" disc sanders and 8-hole vacuum sanders, but we like them as steel wool pads that happen to be self-adhesive. There are (3) 5" pads in each pack. Each pad has (8) holes in it. The cleaning and stripping pads for metal and painted/varnished/urethaned surfaces are an extra-fine "0" grade. For smoothing and deglossing between coats, they are an ultra-fine "00" grade. For finishing and polishing the coated finishes, a micro-fine "0000" grade. Nice quality. Made in the U.S.A.
![]() |
32823 EXTRA-FINE "0" PADS |
A set of (5) needle files, 5-1/2" long, which are coated with industrial diamonds. Perfect for sharpening tools, or doing filing on hard metals etc. when you are sculpting or welding. The shapes are the usual assortment of flat, round and in between shapes.
![]() |
89397 DIAMOND FILES |
Looking for a very, very, very long refrigerator magnet? At 15 ft, this 7/16" wide x 1/16" thick magnetic strip should just about go up one side, across the top, and down the other side. It's flexible, but can be broken if bent back against itself -- which means that small children can make craft magnets without having to cut the strip or themselves! We love it when a plan comes together!
![]() |
34204 STRIP MAGNET |
This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.
![]() |
88366 TWEEZERS |
Well, we've got a handle on this one, anyway. And it needs one, cuz it'll grab onto (and hold onto) 100 lbs if the surface is flat. Which means you've got an instant handle for moving big steel stuff. With its open-ended handle, it even works as a no-installation hook on an I-beam. Handle and magnet together are 5" long x 3-1/2" tall x 1' thick, with a plastic body for the ceramic magnets, and a rubberized grip. Paul says it's quite, well, handy.
![]() |
93131 HANDLE MAGNET |
A good alternative for when you need to fit a magnet into a little hole, like in a door closure. These neodymium magnets are 13/32" dia x 19/32" long, with approx 4 lbs of lift. Cute and useful. Sold in packages of (2) or for larger savings try the package of (20).
![]() |
37403 4-LB CYLINDER MAGNET |
Tube-O-Slipperiness. Lubricate to your heart's content with this 6g/0.21 oz tube of graphite powder. Excellent for goop-and-drip-free lock greasing. Made in the USA by Dixon/Ticonderoga.
![]() |
36502 LOCK MATE |
Turn any standard 1-gallon paint can into an easily re-sealable, spill-resistant, screw-cap container. The plastic lid snaps tightly into the can and has 2" ID mouth with a screw-cap. Keeps leftover paint from drying out and, even better, keeps your kids (or you) from dumping a gallon of Lizard-Lip Pink latex onto the hardwood floor while you're painting the living room. Much easier to pour from, too.
![]() |
38604 PAINT LID |
Keep dropping tools, screws, nails and everything else, do you? Occasionally smash your thumb to a purple pulp? The Magna Pro was made for you. It's a 14-3/4 x 12" nylon pouch with 5" x 5" and 7" x 5" mesh pockets, (9) embedded 9-1/2" long magnets, and (3) hook-and-loop straps. Attach it to a ladder and watch it hang on to your tools for you. Bonus 1: a 10-3/8" x 3-1/2" wrist strap with (9) thin magnets to grab onto nails and screws while you work. Bonus 2: a plastic, pliers-like nail and screw holder with slots for (11) sizes of fasteners, to save your fingers while you hammer and screw.
![]() |
38996 MAGNA PRO |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »