
CJ calls this new 12VDC squirrel cage blower “insanely gusty,” if your looking to move some serious air. It’s 8 amps, and spins approx 2000 rpm. The cage is 6-1/4” dia x 2-3/4” and the motor is mounted on a 6-5/8” dia plate with 1/4” mounting holes and foam tape on the business end. The motor housing measures 3” dia x 2-7/8”. Normally CCW, but reversible.
![]() |
36842 8 AMP BLOWER |
on the subject with this 18" long x 5/8" dia blacklight bulb. Should mate with any fixture taking 18" long x 5/8" dia. fluorescent bulbs. Draws 16W at 120VAC and makes white shirts look all spooky and stuff, dude. Has a standard 2 prong tip on each end.
![]() |
36852 BLACKLITE BULB |
They're silver Mardi Gras beads, actually. Our each is a package of (3) 16" strings of 1/4" dia chrome-plastic beads, and if you have even the foggiest notion why these necklaces say "Speed Beads" on the package, please let us know.
![]() |
36954 MARDI GRAS BEADS |
This clever little bicycle or head lamp has (9) bright white LEDs flanked by a pair of red LEDs. Set it for one of (3) modes: single white LED; all (9); or just the (2) red flashers. Has a handlebar mount and an adjustable elastic head strap, and swivels up/down and left/right in either. The light measures 2-5/8" x 2-7/8" on a 1-3/4" x 1-5/8" bracket and we'll include (3) "AAA" batteries. It runs about 24 hours on a set of alkaline batteries. The perfect gift for the coal miner who moonlights in the Tour de France.
![]() |
92975 BIKE & HEAD LAMP |
Walking sticks have moved into the space age! This walker's/hiker's friend has futuristic features and the look of an inter-galactic weapon. The high-quality collapsible aluminum stick extends from a packable 27" to a full 56", and has a carbide tip with a rubber cover, a removable 2" dia disk to keep the stick from sinking into soft ground, and an internal shock absorber that can be turned on or off. At the top, a 5-LED flashlight with a 90° pivot is embedded in a molded-plastic cane-style handle to light your way. For mountain trekking, lengthen the stick, slip the adjustable canvas wrist strap over your hand, and clutch the stick by the padded foam section below the cane handle. Directions, diagrams, and 1100mm to 1350mm gradations are marked clearly on the 3-draw pole. We'll pick a black or anodized red, green, blue, silver or purple version for you.
![]() |
93032 WALKING STICK |
$13.95
EACH
Out of Stock. Check Back Soon! |
Here's a nice 4-pack to replace them. These steel, 1-1/8" OD x 5/8" ID x 5/16" thick bearings have a 7/8" long x 5/8" OD x 5/16" ID race. The outer race has a light score around one end for a C-clip. Made in the USA by Kendale.
![]() |
37287 KENDALE BEARING |
This clever little artist's brush holder/cleaner will keep those oil or watercolor brushes standing up (or down) straight with their little heads under water or paint thinner, clean and un-bent until you need them. A 4" dia x 2" deep aluminum cup is topped by a 6" tall U-shaped handle with a brush-holding spring across the top. Inside the cup is a mesh screen (with its own handle) for to clean the paint off and let it settle to the bottom, away from the bristles. The handle is removable for storage or travel.
![]() |
93264 BRUSH WASHER |
Even as you read this, our office refrigerator is playing all by itself. Yours could, too, if you had this extremely cool set of automatic working-gear fridge magnets. Very instructive for budding engineers, just plain fun to watch, and, we assume, amusing for the ice box itself. You'll get (20) 3/8" thick plastic gears in assorted neon colors, all of which interlock in various patterns and turn all by themselves, driven by the 5" dia x 2" thick motorized gear/picture frame that runs on a couple of "AA"s that you provide. Gears include (7) at 4-5/8" dia and 3-1/2" dia and (6) at 2-1/2" dia. Buncha bright stickers included at no extra cost.
![]() |
92939 FRIDGIGEARS |
Call it DIY signage or fridge magnets. Our each is (3) sheets of very cool magnetic white paper, 8-1/2" x 11", ready to paint or draw on, and thin enough to cut it to the shape you need. What'll they think of next?!?
![]() |
93378 MAG PAPER |
Dinosaur skeleton. Not, sadly, actual size, but a cute little snap-together 3-D puzzle of a T-rex, triceratops, or wooly mammoth (we'll pick one) skeleton in flexible glow-in-the-dark plastic. All stand approx 13" tall. For ages 6+.
![]() |
38063 3-D FOSSIL PUZZLES |
Our special Little-Fans-R-Us offering. All these muffin fans are square and all have mounting holes at the corners. "Com" = Comair-Rotron. "Mech" = Mechatronics, Inc., Aav is Aavid Thermalloy. All are UL. For more information including manufacturer part number and quantity discounts, please contact customer service.
| VOLTS | SIZE | ||||
|---|---|---|---|---|---|
![]() |
38117 MUFFIN FAN | 12 VDC | 1-1/2" x 1/4" | Details | |
![]() |
38119 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details |
$3.95
EACH
Out of Stock. Check Back Soon! |
![]() |
38120 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details | |
![]() |
38121 MUFFIN FAN | 12 VDC | 3-1/8" x 15/16" | Details | |
![]() |
38123 MUFFIN FAN | 12 VDC | 3-5/8" x 1-1/4" | Details | |
![]() |
38619 MUFFIN FAN | 12 VDC | 3-1/8" x 1" | Details | |
![]() |
38720 MUFFIN FAN | 12 VDC | 3-5/8" x 1" | Details |
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »