Express Shop!
Search Our Stuff
View Cart (0)
Sign In/Up! (It's Worth It!)
Home
/ Drives and Wheels
Steel Wheels
And very little-red-wagonish wheels at that (especially if your wagon is very heavy and very well made). Red painted-steel hubs, solid black-rubber tires. Measure 7" dia with 5/8" ID axle bearings. The tire treads measure just under 1-3/4" wide. Should take a 150-200 lb load apiece.
 |
39172 RED WHEEL |
Skateboard Bushed?
That's what these nylon bushings were made for, but they're suitable for anything that could use a little bushing. Small one is 15/16" dia x 7/16" thick with a 3/8" bore and a slight taper and very light striations on the wider face. The middle-sized measures 15/16" dia x 15/32" thick with a 3/8" bore and a slight taper. The largest is 1" dia x 17/32" thick with a 3/8" bore.
|
36271 LARGE BUSHING | |
|
36269 MEDIUM BUSHING | |
|
36270 SMALL BUSHING |
Solid Rubber Wheels
Hard, black rubber, 3" dia x 1-5/8" wide, with an axle bearing and a 3/8" ID. These wheels have been used a bit, so the treadless surfaces might be a touch scuffed up. Plenty of revolutions left in them, though.
|
37866 RUBBER WHEEL |
Popular Tags:
4makingtamperproofbiketrailer
rybot
daddio
|
Add Tag 
Missing Link
Or extras. You pick. This chain was originally made for Stanley garage door openers. Order a 10-ft section of #48 single-roll roller chain. Sorry no master link.
|
36161 CHAIN, NO MASTER |
Popular Tags:
LordRune
2tonechaos
alteredbit
|
Add Tag
Cast Yer Eyes On This
We're calling it the 400-lb caster, but that's just a rough guess. It's a big guy, though. Its 4" dia x 1-5/8" thick solid rubber wheel swivels on a 5-1/8" x 4" steel plate. Has 3/8" mounting holes. Will stand 4-7/8" tall when mounted. A big guy, in the caster family.
|
38633 SWIVEL CASTER |
Pull, Pull, Pull Your Boat
A couple of pulleys just ready to be combined into the block and tackle you need for tiny jobs, like trimming your bonsai trees or hauling your model boat out of the pond. Get blocks with (1) or (2) sheaves and rig up whatever you need. Each block has an aluminum frame about 3–1/2” long with “S” hooks on each end. The sheaves, or wheels are about 2” dia x 1/4” wide, with a “V” groove that looks perfect to handle 1/8” or smaller Venetian blind cord. These dudes are perfect for demonstrating mechanical advantage in the physics lab!! But not for heavy lifting.
|
91186 SINGLE SHEAVE PULLEY |
Popular Tags:
zappenfusen
Johnlikes
waltsvw
|
Add Tag
Sprockets
We have a gaggle of sprockets, all plastic, all made to handle #25 chain (which has 1/4" spacing between adjacent links.) In the listing below, we list them by the number of teeth and nominal diameter x bore diameter. Further details of mounting and fastening are explained in the comments.
| Dia. x Bore | Teeth | ||||
|---|---|---|---|---|---|
|
23060 SPROCKETS | 1-1/16" x 1/4" | 12 | Details |
Popular Tags:
benbot
1sheep
StuffINeed
|
Add Tag
Roll 'Em, Roll 'Em, Roll 'Em
A nice set of black-plastic casters-our each is a set of (4)-in "office-equipment" style. They are 2" dia x 1/2" thick double wheels on 3/8" dia stems and 1-5/8" square steel plates with (4) 3/16" dia mounting holes. They're 3-9/16" tall top to bottom. Note: (2) of the casters swivel, (2) are fixed, and none of them lock.
|
36407 LG. PLATE CASTERS |
60 At 60°
This black-plastic helical gear leans toward the unusual. It is 2" dia x 3/16" thick, with its (60) teeth set at about a 60° angle. A 1/4" dia steel shaft extends 9/16" on one side. On the second side, the side with the 1/4" x 7/16" dia bushing, the shaft extends an additional 1-3/16". Definitely a new slant on gears.
|
31693 HELICAL GEAR |
This Way & That Way
Look at those double-swivel castors go! The light-duty casters (for office furniture, maybe?) have gold-tone centers and double black-plastic 1-15/16" dia wheels and swivel in (2) directions. The 1-3/4" long steel stem is 9/32" dia at the top and bottom, slimmer in the middle. Our each is a set of (4).
|
32886 DBL WHEEL CASTERS |
V-Belt
Ve vant you should buy zees belt, if you need a type 3L300 belt for variable speed apps. It's 3/8" wide x 7/32" thick (1/4" where it hits the sprocket), approx 27-3/4" running inches, vith a 10" ID when round. Vich makes it a really, really big hat band, or just the thing for a backyard ring-toss game.
|
35841 V-BELT |
Shop by Popular Tags
Click a phrase to shop for products associated with that phrase (AKA "Tag"). More popular tags appear bigger. Learn more »
